Product Classification
Contact Information
318 7910000
#39, Weft Road No.2, Anping County 053600, Hengshui City, Hebei Province, China
Stainless Steel Welded Wire Mesh
SHUNQIANG supplies stainless steel welded wire mesh from Anping, Hebei, China for industrial enclosures, cages, machine protection, fabrication, food-handling equipment, construction protection and other applications that require a stable welded grid.
Our current welded mesh range is organized mainly around SS201 and SS304 stainless steel, with multiple square-opening specifications including 1/4", 3/8", 1/2", 5/8", 3/4" and 1" within the existing product range.
SS201 welded wire mesh is generally considered where purchasing cost is important and the application is not exposed to highly aggressive corrosion conditions.
Current SHUNQIANG SS201 product categories include 1/4", 3/8", 1/2", 5/8", 3/4" and 1" opening options.
When selecting SS201, consider more than the initial material price. Humidity, cleaning chemicals, outdoor exposure and expected service life can determine whether SS201 remains appropriate or whether SS304 should be considered instead.
SS304 is a widely used stainless steel grade for welded mesh where greater corrosion resistance is required than a cost-focused SS201 specification can normally provide.
SHUNQIANG's current SS304 product listings include multiple opening sizes such as 1/4", 3/8", 1/2", 3/4" and 1".
The existing 1/2" SS304 welded wire mesh range also illustrates why wire diameter must be specified together with opening size. Current listed configurations use the same 1/2" opening with wire diameters including 0.58 mm, 0.68 mm, 0.88 mm, 0.92 mm and 1.03 mm.
These products share the same nominal opening but differ in weight, rigidity and stainless steel consumption.
Opening determines the clear spacing between adjacent wires and is one of the first parameters to define.
Smaller openings are generally selected when the mesh needs tighter containment or screening. Larger openings provide more open area and may be more suitable for guards, enclosures and applications where airflow or visibility is required.
However, opening size should never be evaluated alone.
Wire diameter affects rigidity, weight, resistance to deformation and stainless steel consumption.
For example, two 1/2" welded meshes can have the same opening but perform differently when one uses substantially thicker wire.
A thicker wire normally:
increases mesh weight;
increases material consumption;
improves rigidity;
reduces the clear open area relative to the same nominal spacing;
can increase cutting or forming effort;
changes the quotation.
For international RFQs, providing the wire diameter in millimeters reduces confusion between different wire-gauge systems.
Roll dimensions influence installation planning, material utilization and transport.
One current SHUNQIANG 1/2" SS304 product listing includes 30 m roll lengths with several width options, depending on wire diameter.
If your project will be cut into repeated finished pieces, provide the required final piece dimensions as well as the requested roll size. This allows material utilization to be considered during specification review.
A welded mesh roll and a welded mesh panel may use similar stainless grades and openings but they serve different procurement requirements.
| Supply Form | Best Considered When | Confirm Before Ordering |
|---|---|---|
| Welded Mesh Roll | Continuous material, repeated cutting or long installations are required | Grade, opening, wire diameter, width, roll length and quantity |
| Welded Mesh Panel | Flatness, rigidity and fixed installation dimensions are important | Grade, opening, wire diameter, panel dimensions and processing |
| Cut/Fabricated Mesh | The mesh must fit a defined component or assembly | Finished dimensions, shape, bending requirements and drawing |
The correct material depends on the service environment, not simply which grade has the lower purchasing price.
| Selection Factor | SS201 | SS304 |
|---|---|---|
| Purchasing priority | Often considered where material cost is important | Common choice where improved corrosion resistance is required |
| Environment | Better suited to relatively moderate exposure conditions | Better suited to moisture and more demanding general environments |
| Outdoor use | Confirm exposure before selecting | Often the more appropriate starting point for outdoor applications |
| Cleaning conditions | Review chemical and moisture exposure carefully | Better general option where repeated cleaning is involved |
| Decision rule | Do not select on price alone | Consider when corrosion resistance has greater lifecycle value |
If the application involves chloride, salt-bearing environments or more aggressive chemical exposure, buyers often consider more corrosion-resistant stainless grades such as SS316. Confirm the required grade and availability before ordering.
For machine protection, opening and wire diameter should be selected together.
The opening determines access and visibility, while wire diameter influences panel or mesh rigidity. Finished dimensions and the supporting frame also matter if the mesh will be fabricated into a guard.
Opening is usually selected according to the size of the animal or object that must be retained.
Wire diameter should then be checked for resistance to bending and deformation. Edge condition also becomes important if cut mesh will remain exposed after fabrication.
For food-handling or carrying applications, material grade, cleanability, opening, finished geometry and the actual contact conditions should be reviewed together.
Do not assume that the term “stainless steel” alone confirms compliance with a specific food-contact regulation. If your project requires a particular material document, test or regulatory standard, include it in the RFQ.
Construction protection applications may prioritize opening, wire diameter, mesh dimensions and installation method.
Where a rigid flat component is required, a welded mesh panel may be more suitable than a roll.
Welded wire mesh can provide stable coarse screening, separation or support.
For fine or micron-level filtration, do not select welded mesh solely because it is stainless steel. Fine filtration often requires a woven or specialized filter mesh construction.
A useful custom welded mesh request should describe what is actually being changed.
Relevant specification or processing requirements can include:
Stainless steel grade
Square opening size
Wire diameter
Roll width
Roll length
Finished cut dimensions
Cutting
Bending
Fabricated shape
Quantity
Project-specific packaging requirements
SHUNQIANG's documented production information describes automated welding for stainless steel welded wire mesh together with precise cutting and bending for customized mesh applications.
For a simple cut size, finished dimensions may be sufficient. For a component that requires several bends, unusual geometry or integration into another structure, provide a drawing.
The welded structure is created by joining wires at their intersections. Compared with a woven structure, this helps the mesh maintain a defined grid after cutting and makes welded mesh useful where dimensional stability and fabrication are important.
SHUNQIANG's documented quality-control process includes:
Raw material inspection
Wire drawing control
Welding process inspection
Mechanical and dimensional testing
Surface quality inspection
Final quality inspection
Packaging and shipment
If your project requires additional dimensional inspection, material documentation or another project-specific verification, state the requirement before quotation.
SS201 can be considered for cost-sensitive applications under relatively moderate corrosion conditions. SS304 is generally the better starting point where moisture, outdoor exposure or repeated cleaning increases corrosion requirements.
No. Opening should be combined with wire diameter and stainless steel grade. Meshes with the same opening can have different weight, rigidity and cost when different wire diameters are used.
SHUNQIANG's website documents customized mesh processing including precise cutting and bending. Provide the required grade, opening, wire diameter and finished dimensions. Drawings are recommended for complex shapes.
SS316 is a common industry choice for more corrosive environments, but the current main welded-mesh categories on this page are SS201 and SS304. If your project requires SS316, specify the grade in the enquiry so availability can be confirmed.
MOQ may depend on whether the requested grade, opening, wire diameter and dimensions correspond to an existing specification or require custom production. Include your required quantity when requesting a quotation.
A drawing is not normally necessary for a standard mesh roll. It becomes useful when you require cut pieces, bends, special geometry or defined finished dimensions.
It can be suitable for screening, support or relatively coarse separation. Very fine particle or micron filtration often requires woven or specialized filter mesh, so provide the required filtration size before selecting the mesh construction.
Get SS201/SS304 welded wire mesh rolls, panels and custom-fabricated pieces — specified by grade, opening, wire diameter and finished dimensions. SHUNQIANG delivers mill-direct pricing, automated welding, precise cutting/bending and export-ready packaging for global B2B buyers.Request Your Custom Quote Today
see all
Pack up
Applications
Hebei Shunqiang Wire Mesh Products Co., Ltd. was established in 2012. Through years of efforts and continuous development, the company now has various technical and scientific research personnel, including over 30 individuals. It holds 2 invention patents, 2 utility model patents, and one certificate of protection issued by the Ministry of Public Security. The equipment is advanced, the process flow is reasonable and scientific, and the quality inspection system is complete.
Food production line filter screen
Food production line filter screen
Core Application Areas of Wire Mesh in the Construction Industry
One of the most common applications of Wire mesh in the construction industry is concrete reinforcement. Welded wire mesh panels (WWM), stainless steel welded mesh, and rebar mesh sheets are widely used in:
